SSD drives are becoming more popular than HDD drives. This is because of the additional operational speed it gives. However, although SSD drives are known to boost your computer experience, recently, many users have complained about facing severe issues.
All the complaint points toward one single problem – SSD drives going dead on them for no apparent reason. With an SSD drive getting damaged or failing to perform, all your data is stuck inside it. And the worst part is that if you are not careful with the recovery, you can lose them all.
So, many users are asking – is it possible to recover the data from a failed SSD? The answer is YES. You can recover data from the SSD card.
Now the million-dollar question is, HOW?
But before we start with the solution, we must know the causes that bring you to this position.
How Does SSD Fail?
Unlike SSD, there are no physical moving platters. So, they are immune to old hard drive issues. However, as they are mechanical devices, they are prone to failure.
SSD requires a capacitor and power supply. This is where the weak point lies. When a power surge happens, these points are affected, directly affecting the SSD drive.
The other problem you can face while using SSD is that they have limited read/write cycles. So now, the question is, how long will an SSD last? Well, experts state that they are designed so that they will last more than they are needed.
However, you can’t just take things for granted when using an electronic device.
How To Recover Data From A Failed SSD?
The following are the steps you can use to recover data from a failed SSD.
Step 1: Do Not Format Or Repair On Your Own
A logical failed SSD drive can be labeled as RAW. Therefore, you can easily repair the drive by simply formatting it. In fact, the system will also ask you to format the drive before using it. However, the moment you format the drive, all your data from the SSD will be deleted.
Thus, it is recommended that you should never format your SSD drive. Or try to repair it using an unknown third-party software tool.
Step 2: Assign A Drive Letter
If the SSD volume isn’t visible in the file explorer, try giving the Drive a name. For instance, you can assign a drive letter via Disk Management Tool. The steps are given below.
- Connect the SSD drive.
- Open disk management tool.
- Right-click the SSD volume.
- Select ‘Change Drive Letter & Paths.
- Add a letter and press OK.
- A pop window will appear asking you to format the disk and cancel the prompt.
Step 3: Perform Failed SSD Drive Recovery
Now that you can see SSD volume on your system, it is time to perform a data recovery operation. For that, you need to download data recovery software from The Pirate Bay.
Once the software is downloaded, launch the software. The user interface will show you the SSD volume; select the volume. Next, turn on a deep scan. This will help you find all the data from the drive and display them on the screen in an organized manner.
Navigate through the data you want to recover, select the data and recover. While recovering the data, ensure that you are recovering it in a different drive volume.
Extend The Life Of Your SSDs
Like any other electronic, SSD does have an expiry date. What we have seen so far it’s five years. So no, we are not saying that your SSD will not work after five years. We are talking about the time period in which you don’t have to think about SSDs.
Once five years are over, you will start experiencing several problems related to SSDs. So, to ensure you do not lose any sensitive data due to sudden SSD failure, we advise our readers to start looking for a replacement.
Other than that, here are a few things you can do to elongate the life of your SSD card.
- Avoid extreme temperatures.
- Avoid any kind of sudden power outages or fluctuations.
- Always ensure that your SSD is never full. This prevents your data from experiencing bad locks.